MELAG MELADEM 47 WATER TREATMENT SYSTEM

MEL-01047

Increasing hygiene requirements in the processing of medical products can involve the frequent sterilizing of instruments. The consequent increased need for high quality demineralised water is provided amply by the MELAdem 47 and at low cost. The reversal of the physical principle of osmosis is an extremely environmentally-friendly type of water processing. MELAdem 47 produces around 3-5 litres of feed water per hour, so that several MELAG steam sterilizers can be supplied at the same time.

Product type MELAdem 47
Product dimensions (H x W x D) 46 x 40 x 18 cm
Total unit weight with filters approx. 6 kg
Pressure tank
Height 40 cm
Diameter approx. 28 cm
Volume approx. 10.5 l (with 0.4-0.5 bar primary pressure, final pressure approx. 4 bar)
Empty weight 3.8 kg
Osmosis module
RO membrane TFC bacteria resistant, wound module
Retention RO membrane nominal salt retention approx. 95 %
Filter
Fine filter I particle fine filter
Fine filter II activated carbon filter
Afterfilter I ion exchanger, contents approx. 0.7 l
Cold water
Cold water tap water
Bacteriological quality drinking water
Length inflows/outlets approx. 2.5 m feed line (3/4″) | approx. 6 m pressure line (6 x 1 mm)
Iron content max. 0.1 mg/l
Total salt content max. 1500 mg/l
Water pressure min./max.1) 2-6 bar
Water temperature min./max. 5-35 °C
pH value min./max. 4.0-10.0
Permeate
Capacity 190 l/day (value at 4.5 bar/25 °C) | 127 l/day (value at 4.5 bar/15 °C) | 103 l/day (value at 4.5 bar/10 °C)
Conductivity approx. 20-30 µS/cm at 600 µS/cm cold water | < 1 µS/cm at 600 µS/cm cold water and non-exhausted ion exchanger
Production 20-25 %
  • Water pressure that is too low can be increased with the optionally available MELAG pressure increase pump.

Request a quote or more information​ about this product

You may also like

18.0cm x 11.8cm x 3.0cm
MEL-01180
INCLUDES CF-CARD LOGGER & CARD
MEL-01039