Description:
This extra large 22" wide x 60" long (55.88 cm x 152.40 cm) top is die formed from one piece of heavy-gauge stainless steel with rounded corners. This one piece construction eliminates welding, seams and sharp edges and helps ensure a bacteria-free environment.

The table features slight center elevation with a shallow trough around the table edges for fluid drainage. A drain outlet on the end has a hook for attachment of an optional collecting pail.

One direction tilt locks in any angle from horizontal to near vertical and the table top adjusts in height from 28 3/4" to 38 3/4" (73.03 cm to 98.43 cm), maximizing your comfort and reducing fatigue while performing surgical procedures.

Description:
This extra large 22" wide x 60" long (55.88 cm x 152.40 cm) top is die formed from one piece of heavy-gauge stainless steel with rounded corners. This one piece construction eliminates welding, seams and sharp edges and helps ensure a bacteria-free environment.

The table features slight center elevation with a shallow trough around the table edges for fluid drainage. A drain outlet on the end has a hook for attachment of an optional collecting pail.

One direction tilt locks in any angle from horizontal to near vertical and the table top adjusts in height from 28 3/4" to 38 3/4" (73.03 cm to 98.43 cm), maximizing your comfort and reducing fatigue while performing surgical procedures.

Description:
This patented Shor-Line feature has been proven by veterinarians, time and time again, to help prevent hypothermia during small animal surgeries. It is now a standard feature you won’t want to be without!

Controlled heating in temperature ranges from 70° F – 97° F (21.2° C – 36.2° C) assures even heat distribution with no hot spots.

Shor-Line’s V-top heated surgery table has two panels, which adjust from horizontal to near vertical to hold the patient in the desired position during surgery. Each panel contains an 8" x 48" (20.32 cm x 121.92 cm) heated area, with an overall heated area of 16" x 48" (40.64 cm x 121.92 cm). Made of heavy-gauge satin finish type 304 stainless steel, the overall dimension of the large table top measures 19" wide x 58"long (48.26 cm x 147.32 cm).

A heated filament pad under the table top channels heat to the table surface. The thermostat control is located on the frame for easy monitoring of temperature.

Two sliding, quick-release, cam cleat tie-down attachments are provided on each side of the attachment rail. Optional ancillary items, such as the IV holder and limb restraints, compliment the system’s attachment rail (see page F15). A 3" (7.62 cm) stainless steel trough permits fluid runoff into a drain outlet. The hydraulic lift mechanism is easily operated by a foot pedal and smoothly adjusts the table top height from 30 1/2" to 41" (77.47 cm to 104.14 cm) with a pumping action. With just a step on the release bar, the table top glides downward to the desired height. CSA approved.

Description:
The one directional tilt mechanism can be locked from near vertical to horizontal, at any angle; however, the top does not rotate upon its base.

The pedestal base is covered in heavy-gauge stainless steel. Its width and weight provide a sturdy, stable support for the working surface, yet in no way interfere with your legs and feet as you move around the work surface. Four adjustable screws facilitate easy leveling. CSA approved.

Description:
When it’s folded against the wall, it extends only 5" (12.7 cm), leaving your room free for other purposes, yet it unfolds in seconds, and you have a solid, smooth stainless steel working surface which is a generous 20" wide x 44 1/2" long (50.8 cm x 113 cm).

The folding action is simple, yet it locks in position with assurance of rigid security.

This entire table, including the smooth action folding mechanism, is stainless steel. Properly cared for, as with all Shor-Line tables, it will last a lifetime.

Description:
The 20" wide x 44 1/2" long (50.8cm x 113 cm) top of this exam/treatment table is die-formed from one piece of 20 gauge type 304 stainless steel. The top, with raised edges to prevent fluid runoff, is polished to a smooth satin finish and permanently attached to a heavy 3/4" (1.9cm) board frame for sound-deadening solidity.